While holding down the (Feed) button, press the (Power) button three times, and then release the (Feed) button. To configure the Wi-Fi settings again, or if the status of the Wi-Fi connection for your printer is not clear, reset the Wi-Fi settings of the printer. If you are going to connect the printer to your network, we recommend that you contact your system administrator prior to installation. You must confirm your Wi-Fi settings before you proceed with this installation. Infrastructure mode allows you to connect the printer to a computer or mobile device via a Wi-Fi access point/router.įirst you must configure the Wi-Fi settings of your printer to communicate with your Wi-Fi access point/router. After the printer is configured, computers or mobile devices on your network will have access to the printer. To use the Internet, use a wired connection (when a computer is connected), or connect using Infrastructure mode. You cannot connect to the Internet via Wi-Fi while using Wireless Direct. You can find the serial number label on the back of the printer or in the battery cavity. (See the FAQ: " Using the Printer Setting Tool".) The Printer Setting Tool also allows you to easily apply the network settings changes to multiple printers. (See the FAQ: " Using the Printer Setting Tool".) You can change the printer’s network settings using the Printer Setting Tool. If you press the (Wi-Fi) button for five seconds or more, the printer will enter the WPS mode and any connection using Wireless Direct will fail. When the connection is established, the (Wi-Fi) indicator lights in blue. Use your computer or mobile device to select the SSID of your printer ("DIRECT-*****_PJ-773" where "*****" is the last five digits of the product serial number) and enter the password ("773*****"). The (Wi-Fi) indicator starts flashing in blue once every three seconds. Press and hold the (Wi-Fi) button on your printer for one second to turn the Wi-Fi function on. See the FAQ: " Using the Printer Setting Tool (for Mac)" for more information on the Printer Setting Tool. (This is selected as the factory default settings.) Start the Printer Setting Tool on your computer, and confirm that is set to in the tab. See the FAQ: " Using the Communication Settings (for Windows)" for more information on the Communication Settings.Ĭonnect the printer and computer with a USB cable. Start the Printer Setting Tool on your computer, and click the button. When you connect to a mobile device, use a Windows PC or Mac to confirm the settings.Ĭonnect the printer and computer with a USB cable. Wireless Direct allows you to connect the printer to your computer or mobile device directly without a Wi-Fi access point/router the printer serves as a Wi-Fi access point.Ĭonfirm the Wireless Direct settings of the printer. The Printer Setting Tool is available from the section of this website.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |